Skip to content Skip to sidebar Skip to footer
Home / Can Not Upload to Radio With Chirp

Can Not Upload to Radio With Chirp

Post a Comment

k6whp


I checked the previous messages (perfunctorily) and did non see a direct answer to this question and so my apologies for whatsoever repetition. In attempting to modify a code plug (add frequencies) to my FT60R, I thought I'd give  Chirp a whirl.

It read the data from the radio accurately and without incident. However, when I attempted to write the data back out to the radio, the dialog comes up with the vendor and model edit boxes disabled. Any suggestions or ideas?

Thank you in advance!


--
William, K6WHP
"Cheer up, things could get worse..then I cheered upwardly and, sure enough, things got worse!"


Did y'all really try to write back to the radio?  While the boxes may have been grayed out, did they still show the FT-60 in the box?

Jardy Dawson WA7JRD

Message sent through sub space hailing frequenciesusing the Universal Translator.

toggle quoted messageShow quoted text

On December 23, 2018, at ten:20, k6whp <k6whp@...> wrote:

I checked the previous letters (perfunctorily) and did non encounter a direct reply to this question so my apologies for any repetition. In attempting to modify a code plug (add frequencies) to my FT60R, I thought I'd requite  Chirp a whirl.

It read the data from the radio accurately and without incident. All the same, when I attempted to write the data dorsum out to the radio, the dialog comes up with the vendor and model edit boxes disabled. Whatsoever suggestions or ideas?

Thanks in advance!


--
William, K6WHP
"Cheer upward, things could get worse..and then I cheered upward and, sure enough, things got worse!"


Hi

When. I upgraded to win10, I could non utilise CHIRP anymore.

I had the mistake you describe and others not recognizing port.

I tried different cords. Nope.

Some folks said I needed to go back to older drivers and others said I had to become newest drivers.

Thinking I volition adjacent endeavor a new computer that started with win10 and was non an upgraded one.

If I get it to work I will post the solution.

toggle quoted messageTestify quoted text

On Dec 23, 2018, at one:20 PM, k6whp <k6whp@...> wrote:

I checked the previous messages (perfunctorily) and did not encounter a straight answer to this question so my apologies for any repetition. In attempting to alter a code plug (add frequencies) to my FT60R, I thought I'd give  Chirp a whirl.

Information technology read the information from the radio accurately and without incident. Nevertheless, when I attempted to write the data back out to the radio, the dialog comes upwards with the vendor and model edit boxes disabled. Any suggestions or ideas?

Thanks in accelerate!


--
William, K6WHP
"Cheer upwardly, things could get worse..and so I cheered up and, sure plenty, things got worse!"

Don McKee, KE6DM


This is my typical Chirp workflow:

  • Read current settings from rig (requires setting COM port, make, model).
  • Archive "before" config for later apply.
  • Brand necessary changes to config.
  • Annal "after" config for afterward use.
  • Write updated settings to rig (Chirp already knows rig, options to select make, model disabled).

If y'all create a new tab from scratch, without kickoff reading from the rig, you'll need to select the make, model before saving information technology.

-Don, KE6DM


Roll your drivers back to Prolific 3.ii.0.0., if you take a Prolific chipped cablevision. Should work fine, then.

Jardy Dawson WA7JRD

Message sent through sub infinite hailing frequenciesusing the Universal Translator.

toggle quoted messageEvidence quoted text

On December 24, 2018, at 04:31, Mary <m-moon@...> wrote:

Hi

When. I upgraded to win10, I could not employ CHIRP anymore.

I had the mistake you describe and others not recognizing port.

I tried different cords. Nope.

Some folks said I needed to go back to older drivers and others said I had to get newest drivers.

Thinking I will next try a new computer that started with win10 and was not an upgraded one.

If I get it to piece of work I will mail service the solution.

Kk4GOW

On Dec 23, 2018, at 1:20 PM, k6whp <k6whp@...> wrote:

I checked the previous messages (perfunctorily) and did not see a direct answer to this question so my apologies for whatever repetition. In attempting to modify a code plug (add frequencies) to my FT60R, I idea I'd give  Chirp a whirl.

It read the information from the radio accurately and without incident. Even so, when I attempted to write the data back out to the radio, the dialog comes up with the vendor and model edit boxes disabled. Whatsoever suggestions or ideas?

Thank you in advance!


--
William, K6WHP
"Cheer up, things could get worse..so I cheered upward and, sure enough, things got worse!"


Jawdy has it right.  Curlicue back the drivers to 3.2.0.0 is the key.  Win10 is the devil and by trying to "help" you with a driver update, it breaks CHIRP.

Mike Mc
KW4CD

k6whp


Folks,

Firstly, a Merry Christmas and best wishes for a happy new year to all and thank you lot all for your advice! Note that I believe this to be an idiosyncrasy of the software and not a commuter problem My description was perhaps too brief. Let me enlarge on the circumstances.

The symptom I was reporting was that the "the upload to radio" dialog came up with the Vendor and Model edit boxes coming upwards disabled and for some reason the "OK" button was disabled as well. In little with the software this morning, it allowed me to click OK which sent me to the upload instruction dialog. Following instructions, I dutifully clicked through it, got the radio into "CLONE" manner, and pressed the "Monday" button whereupon the software reported a advice fault. This was done several times without success.

I posted a series of pictures on my blog that show what I am talking about.

https://righthandofzod.blogspot.com/2018/12/merry-christmas-and-chirp-my-ass.html

Permit's leave it at this: information technology's a wonderful piece of freeware only I am not presently disposed to track downwards and resolve why it volition not write to my FT60R. I exercise not plan on rolling back whatever drivers, install any operating organization patches or become whatsoever new cables. The main reason is that I already have Bob Freeth's marvelous programs for each of the Yaesu radio types I own (an FT60R, 2 VX-150s, an FT7900, an FT2900, and an FT-817) and they work flawlessly.

Were I not so bountifully appointed, I would pursue a resolution more than diligently.

My sincere thanks to 1 and all!
--
William, K6WHP
"Cheer upwardly, things could get worse..then I cheered upwardly and, sure enough, things got worse!"


Get the RT Systems programming software and cable.


No need to purchase the RT system There is two ways to upload the Ft threescore into chirp, look in the chirp assistance file as it explain both options, equally I had the same issue.

toggle quoted messageShow quoted text


On Tue, April 2, 2019, 7:44 PM Anon Anon <lecontejoe@...> wrote:

Go the RT Systems programming software and cable.

My solution to getting Chirp to work with my three FT-60's was to get a better cablevision.  I purchased a cable which used an FTDI chip rather than a Prolific fleck for the USB to serial conversion.  I haven't had any problems since.  The cable I'yard using is sourced from KJ6ZWL via Amazon (https://world wide web.amazon.com/gp/product/B01FP53ZWE). His company name on Amazon & eBay is "Bluemax49ers".  I've purchased several cables from him and not been disappointed.

Dennis - KC0YKN


I have as well bought cables from him. They are exellent!!!

Mike

toggle quoted messageBear witness quoted text

On Apr iii, 2019, at one:29 PM, Dennis Mitchell (KC0YKN) <kc0ykn@...> wrote:

My solution to getting Chirp to work with my three FT-threescore's was to get a better cable.  I purchased a cable which used an FTDI chip rather than a Prolific flake for the USB to serial conversion.  I haven't had any problems since.  The cable I'm using is sourced from KJ6ZWL via Amazon (https://www.amazon.com/gp/product/B01FP53ZWE). His company proper name on Amazon & eBay is "Bluemax49ers".  I've purchased several cables from him and non been disappointed.

Dennis - KC0YKN

emersonhorlsonflon.blogspot.com

Source: https://groups.io/g/Yaesu-FT-60/topic/chirp_difficulties_with/28843205?20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,28843205

Post a Comment for "Can Not Upload to Radio With Chirp"